• Multiplex RX-6 light M-LINK (Micro) 2.4 GHz receiver #55807

    Click image to enlarge
    - Multiplex RX-6 light M-LINK (Micro) 2.4 GHz receiver #55807 Out of stock
    £49.99 (Incl. VAT)

    Ultra-compact ultra-lightweight six-channel receiver exploiting MULTIPLEX 2.4 GHz M-LINK technology: ideal for use in very small and micro-models. The RX-6 light MLINK is fitted with JST connectors which are in widespread use for indoor models. In terms of circuit technology it is identical to the RX-5 light M-LINK and therefore a good reliable choice for outdoor flying with the smaller model.

    The plus-points:
    • HOLD / FAIL-SAFE function
    • Integral button and LED for:
    FAIL-SAFE programming
    Operating status information

    Servo channel count 6
    Reception system 2.4 GHz FHSS (Frequency
    Hopping Spread Spectrum)
    Operating voltage 3.5 … 9.0 V
    Power supply 4 - 5 NiXX cells 2S LiPo / LiIo
    Operating temperature range -20°C … 55°C
    Dimensions (L x W x H) excl. aerial approx. 30 x 14 x 8 mm
    Weight approx. 3.3 g (1.9 g excl. case)

    Size and weight can be reduced further:
    If there are only 4 channels required the outer receiver case can be removed. By cutting off the servo-plug-bench the size and weight will be reduced to approx. 25 x 13 x 7 mm / 1.7 grams.
    For technically experienced modellers further modifications are possible to make the rx even smaller and lighter. The receiver.pc-board can be shortened / all the serrvoplugs disconnected and and servocables soldered directly to the pc-board. A physical size of 21 x 13 x 2.5 mm with just 1.3 grams can be realized. But still all 6 channels can be used. 
    WARNING: Any modification will invalidate manufacturers warranty!!! It should only be carried out by experienced electronic technicians.
    Servo lead 10 cm (Micro) # 8 5140