/files/frsky/x8r.jpg
/files/frsky/x8r.jpg
/files/FrSky X8R diagram revised.jpg
/files/X8R-SPort and Facilities.jpg

FrSky X8R Receiver

Total: 0.00

 

FrSky X8R Telemetry Receiver with PCB Antenna, (Please note if using ignition systems use RX8R Pro)

 

This next generation FrSky receiver features SBUS, Smart Port and RSSI and perfectly complements the on-board XJT module of Taranis.

The X8R can be used as an 8 channel or a 16 channel (8 normal PWM outputs and 16 on the S.BUS output) Combine 2 X8R receivers and the channels will sync 1-8 on the first and 9-16 on the second.
All Smartport sensors work by daisy chaining into the smartport socket the receiver

 

Frsky X8R receiver now available with UNI Firmware Just add 'Flash to UNI Firmware' on your order

 

UNI ACCST firmware will allow the receiver to bind to any version Taranis/Jumper/RadioMaster radio no matter the protocol firmware in ACCST D16 Protocol. Just Bind and fly!!

 

On licence with FrSky UNI Firmware has been developed and BETA tested over a year in collaboration with FrSky dealers and Mike Blanford of Ersky fame to eliminate the issue that alot of exisitng ACCST Taranis users have come accross, ''what protocol am i on'' ''what is EU V2 firmware''

 

Now all that does not matter anymore with the new UNI ACCST Firmware the receiver will bind to what ever your TX is on (please note this is not compatible with FrSky ACCESS protocol but will work in D16 on an ACCESS radio)

 


Specification:

Dimension: 46.5mm x 27mm x 14.4mm (1.83" x 1.06" x .56")

Weight: 16.8g (.59 oz)

Operating Voltage Range: 4V-10.0V

Operating Current: 100mA@5V

Operating Range: >1.5km (Full Range)

RSSI output: analog voltage output (0~3.3V)

 

Compatibility:

All 16 channels require the FrSky Taranis, or the XJT module.

For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules