Servo Frames for Hitec HS-125mg and HS-5125mg Wing Servos
The servo is screwed into the servo-mount which is fixed in the wing with epoxy. The precise and secure installation of the servo allows the fitting of linkages that are free from play.
A damaged servo can be replaced within seconds.
Frame outer dimensions: 45 x 35 x 13 mm (1.75 x 1.38 x 0.51 inch)
weight: Approx. 4 gmsThe following servos fit the frame Type Hitec 11:
Hitec HS-125 + MG, HS-5125 + MG, HS-5142, Graupner DS 3210, JR 168, TS 014 MG