Zepsus Magnetic Switch
Zepsus Magnetic switch designed and manufactured in Denmark, is the ideal solution for On/Off operation on any R/C model type, gliders, fixed wing, boats and car aplications, by swiping the magnet across the surface above the switch, operating it without having to access the switch directly,
On/Off Function
A clean and easy way to turn on your model, just slide the magnet across the marked area. The switch is mounted inside of the fuselage, out of the air stream, and the magnet will easily activate the switch from outside. No more fumbling for little switches, or plugging in connectors.
Failsafe
This produckt has a built-in failsafe function. It remembers its state for at least 10 sec, if disconnect from the battery. It will protects the switch against power glitch caused by bad battery connection etc.
Stand-by Consumption
The switch has an ultra low stand-by consumption in off-state. The consumption is so low that the switch can be connected to a small battery for several years without discharging it.
Technical Data
Input voltage range: 3v~13v
Ultra low dropout voltage: 40mV@11A
Output current constant: 7A @ +25C ambient temperature
Output current burst: >20A
Ultra low stand-by current: 5µA (micro-ampere)
Connectors: JR-type
Wire: high-quality 0.5mm2 / AWG 20
Weight including cables: 4.3 grams / 0.15oz.
Length including cables: 18 cm / 7 in
Dimensions: 25 x 8 x 5 mm / 0.98 x 0.31 x 0.20 in
Operational temperature range: -40C to +85C
Production test
All switches have been tested with 10A for 30 sec before delivery. Standby consumption is controlled and a visual inspection is made
.Manual:
Magnetic Switch Manual