/files/topmodel/elite/TopmodelCZ Elite 3.06M 1.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 1.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 2.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 3.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 4.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 5.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 6.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 7.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 8.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 9.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 10.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 11.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 12.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 13.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 14.JPG
/files/topmodel/elite/TopmodelCZ Elite 3.06M 15.JPG

TOPMODELcz Elite 3.06M High Performance Electric Sailplane

Total: 0.00

TOPMODELcz Elite is a high performance, 3.06M span electric sailplane designed and manufactured in the Czech Republic.

Elite just loves thermal flying and employs a design that still performs beautifully in less than perfect conditions.

The ready prepared flaps provide the very best of control and work as extremely efficient airbrakes, providing tippy-toe spot landing.

Elite has great flying characteristics - calm and stable in the glide with good penetration into even an above average breeze.

Three-piece wing has a lightweight balsa framework with D-box. The fuselage is made of white gel-coated fibreglass and is reinforced with carbon. The two-piece floating elevator is balsa framework with carbon spar and leading edge. The elevator is controlled using a fibreglass control horn. The rudder is controlled by a pull-pull system - and the drive unit requirement is designed so as to be able to utilise the popular 3S lipo battery sizes from 2.2mAh to 3.2mAh.

Kit Features and Contents:

  • Lightweight gel-coated white fibreglass fuselage and canopy
  • The wings are in three parts for ease of transport and storage
  • Lightweight wings are a balsa framework and covered with genuine Oracover®
  • Removeable tail surfaces are a balsa framework to and also covered with Oracover®
  • Vinyl CNC cut stickers
  • Top quality accessories
  • Complete assembly manual with step by step illustrations

Recommended RC equipment:

  • 7 channel receiver
  • 4 micro servos for ailerons and flaps (Hitec HS 82MG)
  • 1 micro servo for elevator (Hitec HS 82MG)
  • 1 micro servo for rudder (Hitec HS 82MG)

Manufacturers Recommended Power Guide:

  • Motor: MEGA Acn 22/30/3E
  • Controller: 60-80A
  • Spinner: Ø 40mm
  • Propeller: 14x9
  • Flight pack: 3S LiPol 2,2-3,2Ah

For the TOPMODELcz Elite 3.06M High Performance EP Sailplane Manual, click here: