MVVS 4.6/1120 Sport Brushless Motor
AXi 2826/8 equivalent inrunner/outrunner brushless motor with 5mm shaft and integral cooling fan which really shines as a Hotliner motor with 10 x GP2200 NiMh or 3S Li-Po battery packs. This new design offers high levels of durability as the hardened 5mm shaft running in precision ball races is supported directly in the ends of the motor case. These motors are unbelievably smooth running as a result of the dynamic balancing. We are particularly excited about the fact that MVVS motors require no specialist techniques for servicing and all spares are readily available. MVVS electric motors are produced along with their model engine range at Brno in the Czech Republic.
Statorâ€™s diameter 36mm
Length of stator 26mm
Nominal voltage 12V
Shaftâ€™s diameter 5mm
Number of poles 12
Working voltage 8-15V
Recommended current loading 35-45A
Max. load capability 55A/60s
Number of NiCd/Lixx cells 7-12/3-4
MVVS 46/1120 Sport with 10 cell GP2200 NiMh (3 Series LiPo equivalent)
Graupner CAM 12x6 36A 8500 rpm
Graupner CAM 13x7 45A 7600
Test figures are approximate and not taken with calibrated instruments. Figures will vary with controller settings batteries used and state of battery charge.
We recommend Jeti controllers on hard timing for the best results with MVVS electric motors.