• Art Hobby Serenity-EVL 2.5M Glider

    Click image to enlarge
    - Art Hobby Serenity-EVL 2.5M Glider Out of stock
    £255.60 (Incl. VAT)
    Qty

    The Serenity wing features MS1.8/9 airfoil that was specially modified for this sailplane, the benefit of that are very wide speed range and good thermal abilities. Its flying weight is approx. 1500 grams (52oz.) and could be flown on the slope in light to high wind condition. The Serenity wing could be built with ailerons and flaps or only with the ailerons if desired by the builder.

     

    Features:


    – composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for easy access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
    – tapered tail boom is made of carbon fiber/glass composite.
    – wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
    bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
    – light weight V-tail is made of foam cores preeshited with thin poplar veneer for durability and stiffness and has pre-hinged control surfaces and

     

    Kit contains:

     

    Model components, all necessary hardware, plans and step by step instructions.

     

    Wing span
    Length
    Glider weight
    Wing area
    Wing airfoil
    2500 mm / 98.4 in.
    ~1350 mm / 53.14 in.
    800 g / 28 oz.
    42.9 dm2 / 665 sq.in
    MS 1.8/9-modified
       
    Recommended
    Radio
    Receiver
    Ailerons
    Flaps
    Elevator/Rudder
    Battery

     

    7+ch.
    7+ ch. Opima-7, RDS8000
    HS-65MG, HS-70MG, HS-85BB
    HS-70MG HS-5070MH, HS-85MG
    HS-65HB, HS-65MG, HS-5065MG
    2200 - 2400 mAh or 2S LiPo