RaGG-e DoGG Quadcopter Frame
This frame has been designed with speed in mind an improvement from the original 200h cut. Ragg-e have removed the partitions in the arms to improve air flow with the intention of reducing draw and improving on exhaust from the props.
Ragg-e have also removed material from the inside compartment and top plate this has led to a reduction of weight to around 105g this is a frame for the more advance pilot who has found that weight is more of a factor in the builds. With this reduction in weight there have been reductions in the overall strength and durability there is always a trade off.
Not designed for the pilot that is still learning to fly, but with the ease of component transfer in a race enviroment, by only undoing the motor and fc mounting screws this is eaasily transfered into a new frame which could make it a viable race frame for pitstop replacement and keep you in the competition for the next race.
This frame is designed for 4" props and up to 22 size motors.
RaGG-e 200H FPV Quadcopter Frame Specifications:
Materials: 12.7 HDPE
Fasteners:Stainless Steel Size: 200mm diagonally, 155mm wide
Maximum Propeller: 4"
Motor Mount: M3 6mm
Flight Controller Mount: Most standard fitting FC's