Multiplex RX-5 light 2.4 GHz Receiver ID6 #55827
Compact, low-cost five-channel 2.4 GHz M-LINK receivers with UNI connector system. The compact case and small size in conjunction with the in-line socket arrangement makes them a particularly good choice for the smaller model.
This unit has ID6 (activates SMART SX model memory 6 for FunCopter)
Note the ID is only effective if you use the Smart SX Radio. The receivers can also be operated with any other M-LINK radio control system without ID recognition, in which case their features are those of the RX-5 light M-LINK 2.4 GHz.
The model recognition system enables our SMART SX beginners’ transmitter to switch automatically to the appropriate model memory in response to the receiver’s ID. When you switch models, the model-specific settings (e.g. trims, servo direction, Dual Rates) stored in the SMART SX transmitter are always available automatically. This eliminates the need to check servo directions and adjust the trims, as required by typical simple beginners’ transmitters.
* HOLD / FAIL-SAFE function
* Integral button and LED for: Binding, FAIL-SAFE programming, RESET, operating status information
* ID function for automatic model memory switching with SMART SX transmitter
Servo channel count: 5
Receive system: 2.4 GHz FHSS
Operating voltage: 3.5 V … 9.0 V
Power supply: 4 - 6 NiXX cells, 2S LiXX
Permissible operating temperature range: -20°C … +55°C
Dimensions (L x W x H): 34 x 19.5 x 11 mm
Weight: approx. 7 g