/files/mvvselectric2051-m(1).jpg

MVVS 5.6/960 Redliner Brushless Motor

Total: 0.00

A long case 600 size inrunner/outrunner brushless motor with 5mm shaft and integral cooling fan. This new design offers high levels of durability as the hardened 5mm shaft running in precision ball races is supported directly in the ends of the motor case. These motors are unbelievably smooth running as a result of the dynamic balancing. We are particularly excited about the fact that MVVS motors require no specialist techniques for servicing and all spares are readily available. MVVS electric motors are produced along with their model engine range at Brno in the Czech Republic.

Technical Data:
RPM/Volt 960
Stators diameter 26mm
Lenght of stator 36mm
Nominal voltage 12V
Shafts diameter 5mm
Number of poles 12
Working voltage 8-15V
Recommended current loading 35-45A
Max. load capability 65A/20s
Number of NiCd/Lixx cells 7-12/3S
Weight 268g

Recommended use:
Hotliner 3S Li-Po or 12 cells NiMh no more than 13x7 prop
Check current draw that you dont exceed 45 amps

Use the Jeti Advance 70 plus on hard timing or Jeti SPIN 66 controller on outrunner setting with the MVVS 56/690 Redliner.